AC Uninstallation in Delhi
Safe gas pump down into compressor, dismantling indoor & outdoor units, and pipe packing.
- AC blowing room-temperature or warm air
- Water dripping / leaking from indoor unit
- Frequent tripping of MCB / electrical fluctuations
- Low airflow or foul musty smell from cooling vents
- Excessive outdoor vibration or rattling noise
Available Service Options
Select the specific repair or maintenance package needed for your home
What's Included & Excluded
What's Included:
- Gas lock down to prevent refrigerant loss
- Careful indoor & outdoor unit dismounting
- Neat pipe wrapping
What's Excluded:
- Cost of spare parts (quoted upfront at transparent rates)
- Major structural alterations or concealed pipe masonry work
- Unrelated household plumbing or electrical rewiring
Our Step-by-Step Service Process
Professional procedures carried out by our doorstep technicians in Delhi
1. Pre-Service Diagnostic Test
Check current cooling performance, grill temperature, power draw, and error codes.
2. Indoor Unit Servicing / Dismantling
Protect room interiors with waterproof service jacket and access coils and blower assembly.
3. High-Pressure Jet Wash / Drainage Flush
Deep wash cooling fins and flush drain line to prevent indoor water dripping.
4. Outdoor Unit Condenser Cleaning & Pressure Check
Clean outdoor coil grime and measure suction/discharge refrigerant pressures.
5. Final Operational Performance Run
Run unit on full cooling load for 10 minutes to verify optimal room airflow and temperature.
Types of Capacitors in an Air Conditioner & Replacement Pricing
Authentic heavy-duty start, run, dual-run, and fan capacitors for split & window air conditioners. Tested on-site with digital capacitance multimeters. Enjoy discounted labor charges when booked together with any AC Jet or Foam servicing!
Types of Capacitors in an Air Conditioner
Give motors a short, powerful energy boost to kick-start the compressor or fan motor from a dead stop. They disconnect from the circuit once the motor reaches speed.
Provide continuous electrical energy to keep the compressor or fan motor running smoothly while the AC is on.
Combine two capacitors into a single metal or aluminum can. One section runs the main compressor, while the smaller section runs the condenser fan motor.
Standalone smaller MFD capacitors (typically 1 MFD to 10 MFD) dedicated strictly to powering the indoor blower, window AC, or outdoor condenser fan.
AC Capacitor Spare Parts & Labor Charges
100% upfront transparent price list. Final quotation confirmed on-site before installing parts.
Fan Motor Capacitor
Compressor Capacitor (Single-Run)
Combined (Dual-Run) Capacitor
| Capacitor Type | Component Price | Labor Charge (Without Service) | Labor Charge (With AC Service) | Common Ratings & Purpose |
|---|---|---|---|---|
| Fan Motor Capacitor | ₹150 to ₹250 | ₹249 | ₹99 + service charge | 1 MFD to 10 MFD • Indoor blower or outdoor condenser fan |
| Compressor Capacitor (Single-Run) | ₹350 to ₹650 | ₹349 | ₹149 + service charge | 35 MFD to 60 MFD • Keeps compressor running smoothly |
| Combined (Dual-Run) Capacitor | ₹700 to ₹900 | ₹399 | ₹199 + service charge | 36+6, 40+4, 45+10, 45+5, 50+5, 55+6, 60+6 MFD • Compressor + fan dual unit |
AC Drain Hose Pipe & Underground Laying Charges Rate Card
Heavy-duty PVC & UPVC braided AC drainage pipes for split and window air conditioners. Prevent indoor water leakage, wall seepage, and algae blockages with slope-aligned piping and concealed underground laying.
Pipe Types & Laying Applications
Fiber-reinforced transparent/blue flexible hose with high bend radius. Ideal for internal routing from indoor cooling unit to outdoor drain without kinking or flow reduction.
Sturdy, sag-proof UPVC drainage pipe engineered for straight balcony perimeters and external facade drops. Eliminates water stagnation pockets and prevents algae growth.
Heavy-gauge 3/4" drainage pipe providing maximum volumetric discharge. Recommended for high-tonnage 1.5T to 2.0T ACs, humid monsoon peak drainage, and multi-unit shared lines.
Professional wall chasing, floor trenching, underground piping embedding, and cement plaster finishing. Keeps walls neat with zero visible drain pipes across walkways.
AC Drain Hose Pipe Pricing & Laying Rates
Transparent per-foot rate card for high-grade drainage pipes and civil laying labor.
PVC Braided Drain Pipe
- Fiber-woven anti-crush braiding
- Fits standard indoor unit spouts
- Normal surface laying included
UPVC Braided Drain Pipe
- Zero sag prevents back-flow clogs
- UV sunlight & heat resistant
- Normal surface laying included
UPVC Braided Drain Pipe
- Maximum flow for 1.5T – 2T units
- Handles heavy monsoon condensate
- Normal surface laying included
Underground & Wall-Concealed Laying: ₹29/- per foot extra
Want invisible piping? Our technicians chisel wall channels, dig sub-surface floor grooves, secure drain pipes with galvanized clamps, and re-plaster smoothly with cement mortar.
| Drain Pipe Material & Specification | Diameter | Material Rate | Underground Laying Extra | Total Rate (With Underground Laying) |
|---|---|---|---|---|
| PVC Braided AC Drain Hose Pipe | 3/4 inch (19 mm) | ₹25/- per foot | + ₹29/- per foot | ₹54/- per foot |
| UPVC Braided AC Drain Hose Pipe | 1/2 inch (12.7 mm) | ₹40/- per foot | + ₹29/- per foot | ₹69/- per foot |
| UPVC Braided AC Drain Hose Pipe | 3/4 inch (19 mm) | ₹50/- per foot | + ₹29/- per foot | ₹79/- per foot |
AC Copper Pipe Kits with Insulation & Wire Rate Card
Complete factory-spec split AC installation kits featuring pure copper suction and liquid tubes, closed-cell nitrile thermal insulation, and heavy-duty 4-core electrical wire. Available for 0.75 Ton to 2.5 Ton air conditioners.
Copper Pipe Specifications by AC Tonnage
AC Copper Pipe Kit Pricing (Per-Foot Basis)
Includes twin copper pipes, thick nitrile insulation sleeves, and 4-core communication wire.
Small Room / 1 Ton Kit
- 3/8" gas + 1/4" liquid line
- 4-core exact 1.5mm wire
- Surface laying included
Standard 1.5 Ton Kit
- 1/2" gas + 1/4" liquid line
- 4-core under 2.5mm wire
- Surface laying included
Heavy 2.0 Ton Kit
- 5/8" gas + 1/4" liquid line
- 4-core approx. 2.5mm wire
- Surface laying included
Commercial / 2.5 Ton
- 5/8" gas + 3/8" liquid line
- 4-core exact 2.5mm wire
- Surface laying included
Underground & Wall-Concealed Laying: Extra 49/- per foot
Professional wall chasing, floor trenching, heavy-duty clamp fastening, nitrogen pressure leak testing before closing, and smooth cement plastering over the chased channels.
| AC Tonnage Capacity | Copper Pipe Sizes (Suction + Discharge) | Electric Cable Specs | Kit Price (Per Foot) | Underground Laying Extra | Total Cost (Underground) |
|---|---|---|---|---|---|
| 0.75 Ton to 1.0 Ton | 3/8" + 1/4" | Wire 4-core exact 1.5 mm | ₹299/- per foot | + ₹49/- per foot | ₹348/- per foot |
| 1.1 Ton to 1.5 Ton | 1/2" + 1/4" | Wire 4-core under 2.5 mm | ₹349/- per foot | + ₹49/- per foot | ₹398/- per foot |
| 1.6 Ton to 2.0 Ton | 5/8" + 1/4" | Wire 4-core approx. 2.5 mm | ₹399/- per foot | + ₹49/- per foot | ₹448/- per foot |
| 2.1 Ton to 2.5 Ton | 5/8" + 3/8" | Wire 4-core exact 2.5 mm | ₹449/- per foot | + ₹49/- per foot | ₹498/- per foot |
AC Fan Motor (Indoor Blower, Outdoor Condenser & Window AC) Replacement & Pricing Guide
Air conditioner indoor & outdoor fan motor prices in Delhi generally range from ₹1,800 to ₹5,500 (Labor: ₹799 extra), while Window AC motor prices generally range from ₹1,600/- to ₹4,200/- (Labor: Extra 899/-), depending on the brand, tonnage, power rating (wattage), and whether the motor is a standard AC induction or an inverter DC type.
Types of Motors & Diagnostic Symptoms
Single-phase asynchronous motor commonly used in non-inverter split and window ACs. Driven via PCB relay speed taps and an external run capacitor (1.5 to 3.0 MFD for indoor, up to 6.0 MFD for outdoor/window).
Advanced brushless DC motor equipped with built-in Hall-effect sensor feedback and internal microprocessor drive. Delivers stepless RPM control and ultra-quiet energy-efficient performance in inverter ACs.
Engineered with dual output shafts extending from both ends: one shaft spins the indoor centrifugal blower wheel to push cold air, while the opposite shaft spins the outdoor propeller fan with a water slinger ring to cool the condenser coil.
- • Indoor Blower: No room airflow, coil freezes into ice, or error codes (E14, H6, C6)
- • Outdoor Condenser: Fan blade not spinning; compressor overheats and trips within 3 minutes
- • Window AC: Heavy chassis vibration, loud bearing grinding, or slow rotation stopping both cooling & condensation splash
- • Mechanical Noise: Squeaking, vibration rattling, worn-out ball bearings, or burnt copper winding smell
AC Fan Motor Price & Labor Charges in Delhi
Transparent pricing for Split indoor blower, outdoor condenser, and Window AC double-shaft motor replacement.
Indoor Blower Fan Motor
Outdoor Condenser Fan Motor
Window AC Fan Motor (Dual Shaft)
Transparent Motor Replacement Labor Charges
Split AC (₹799 extra): Safely unhooking indoor evaporator or outdoor condenser coil without bending copper lines or causing refrigerant leaks, replacing rubber shock mounts, and dynamic balancing.
Window AC (Extra 899/-): Pulling heavy chassis out of outer sleeve, disassembling center partition bulkhead, unseating blower wheel & slinger condenser blade, and precise dual-shaft alignment.
| AC Fan Motor Category | Application Unit | Component Price Range in Delhi | Labor Charge | Total Estimated Cost |
|---|---|---|---|---|
| Split AC Indoor Fan Motor | Indoor Blower (Cross-flow wheel) | ₹1,800 to ₹5,500 | ₹799 extra | ₹2,599 – ₹6,299 |
| Split AC Outdoor Fan Motor | Outdoor Condenser (Propeller fan) | ₹1,800 to ₹5,500 | ₹799 extra | ₹2,599 – ₹6,299 |
| Window AC Fan Motor (Dual Shaft) | Window AC (Blower + Condenser) | ₹1,600/- to ₹4,200/- | Extra 899/- | ₹2,499 – ₹5,099 |
| Overall AC Fan Motor Range in Delhi | ₹1,600 to ₹5,500 (Component) + ₹799 / ₹899 (Labor) | |||
Window AC Coils (Cooling Coil & Condenser Coil) Replacement & Pricing Guide
Window AC cooling coil prices in Delhi generally range from ₹3,300 to ₹5,499, while Window AC condenser coil prices range from ₹3,499 to ₹6,999 for the part itself, depending on the brand, tonnage, and row or hole configuration. Professional replacement labor is charged at Gas Refilling + ₹499, covering torch de-brazing, fitting 100% copper coils, 400 PSI nitrogen holding pressure test, and deep system vacuuming.
Coil Technology, Construction & Failure Signs
Cooling Coil (Front): Absorbs indoor heat and dehumidifies room air through low-pressure refrigerant boiling.
Condenser Coil (Rear): Discharges high-pressure heat outdoors with help of condenser fan slinger water-splash cooling.
Coils feature 12-hole, 14-hole, 16-hole, 18-hole or 24-hole layouts. Upgrading to a 3-row or 4-row heavy copper coil increases heat exchange surface area, preventing high-head pressure tripping during peak 45°C+ Delhi heatwaves.
- • Cooling Coil: Frequent gas leakage, ice forming on top 2–3 rows, or oily stains on front U-bends
- • Condenser Coil: Outdoor coil corroded from pollution/rain, high discharge pressure, or compressor tripping
- • Corrosion: Pinhole formicary corrosion from acidic humidity and Delhi open-drain sewer gases
Window AC Cooling Coil (Evaporator) Prices in Delhi
Window AC cooling coil prices generally range from ₹3,300 to ₹5,499 for the part itself, depending on brand, tonnage, and row/hole configuration.
Blue Star Cooling Coil
Hitachi Cooling Coil
Carrier Cooling Coil
Voltas Cooling Coil
Godrej Cooling Coil
Other Brands (2 Ton, 5-Star)
Universal copper cooling coil for vintage or non-branded window AC chassis.
Window AC Condenser Coil (Outdoor) Prices in Delhi
Window AC condenser coil prices in Delhi generally range from ₹3,499 to ₹6,999, depending on the brand, tonnage, and row or hole configuration.
Blue Star Condenser Coil
Hitachi Condenser Coil
Carrier Condenser Coil
Voltas Condenser Coil
Godrej Condenser Coil
Other Brands (2 Ton, 5-Star)
Universal fit standard copper condenser coils for vintage or non-branded window AC chassis. Heavy copper tubes tested under nitrogen pressure.
Labor Charges: Gas Refilling + ₹499 Extra
Replacing an AC cooling or condenser coil opens the hermetically sealed circuit. Our comprehensive service includes: unbrazing the old leaking coil, aligning and torch-brazing the new 100% copper coil with silver welding rods, conducting a high-pressure 400 PSI nitrogen holding test, evacuating air with a dual-stage vacuum pump, and performing full refrigerant gas charging (R32 / R410A / R22) to original factory pressure.
| Brand & Specification | Tonnage & Star Rating | Cooling Coil (Evaporator) | Condenser Coil (Outdoor) | Labor Charge | Service Inclusions |
|---|---|---|---|---|---|
| Blue Star | 1 Ton, 5 Star Copper | ₹3,300 | ₹3,499 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Hitachi | 1 Ton, 5-Star Copper | ₹3,999 | ₹4,499 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Carrier | 1.5 Ton, 3 to 5 Star Copper | ₹3,499 to ₹4,999 | ₹4,499 to ₹5,499 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Voltas | 1.5 Ton, 3 to 5 Star Copper | ₹4,499 to ₹5,299 | ₹4,999 to ₹5,899 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Godrej | 1.5 Ton, 5-Star Copper | ₹4,799 | ₹5,699 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Other Brands (LG, Daikin, Lloyd) | 2 Ton, 5-Star Copper | ₹4,499 to ₹5,499 | ₹5,499 to ₹6,999 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Generic / Local Copper Coils | 1.5 Ton Copper | ₹3,599 to ₹5,299 | ₹3,599 to ₹5,299 | Gas refilling + ₹499 | Torch brazing, nitrogen leak test, vacuuming |
| Overall Window AC Coils Range | ₹3,300 to ₹5,499 | ₹3,499 to ₹6,999 | Gas Refilling + ₹499 (Labor) | ||
Split AC Coils (Indoor Cooling Coil & Outdoor Condenser) Replacement & Pricing Guide
Split AC coil prices in India typically range from ₹3,999 to ₹10,999 for the part itself, depending on the brand, tonnage (1 ton to 2 tons), and whether it is an indoor evaporator coil or an outdoor condenser coil. Professional replacement labor is charged at Gas Refilling + ₹499, covering complete cabinet dismantling, torch de-brazing, silver-brazing new copper coils, 400 PSI dry nitrogen holding pressure test, and deep dual-stage vacuuming.
Evaporator vs. Condenser Coil Roles & Engineering
Multi-bend copper array designed to contour around the centrifugal blower wheel. Channels low-pressure liquid refrigerant to absorb indoor room heat and extract humidity into the condensate drain tray.
90-degree curved wrap-around heat exchanger that rejects superheated high-pressure gas heat outdoors. Fitted with hydrophilic blue fins to resist acid rain, open-drain sewer fumes, and high ambient heat up to 48°C.
- • Evaporator (Indoor): Gas discharges within 2–4 weeks; ice frosting on top rows; foul moldy or oily odor from blower
- • Condenser (Outdoor): Pinhole leaks at return U-bends; compressor trips on high-head pressure within minutes
- • Delhi Pollution Damage: Corrosion from nearby open nullahs attacking copper-aluminum joints
Split AC Indoor Evaporator Cooling Coil Prices
Genuine copper indoor cooling coils for inverter and fixed-speed split air conditioners.
LG Inverter Split AC Evaporator Coil
General / Generic Copper Cooling Coils
Split AC Outdoor Condenser Coil Prices by Brand
Curved L-shape copper condenser coils for outdoor units across all leading brands in India.
Blue Star Condenser
Hitachi Condenser
Godrej Condenser
Carrier Condenser
Voltas Condenser
Samsung Condenser
Mitsubishi Heavy
Other Brands / Generic
Labor Charges: Gas Refilling + ₹499 Extra
Replacing a Split AC indoor evaporator or outdoor condenser coil opens the hermetically sealed circuit. Our comprehensive service includes: dismounting the unit casing, torch de-soldering the old corroded coil, precision silver-welding the new 100% copper coil, executing a 400 PSI nitrogen holding test, dual-stage deep vacuum evacuation (down to 500 microns), and full refrigerant gas refilling (R32 / R410A / R22) by weight.
| Brand & Type | Application | Tonnage & Rating | Component Price (Parts Only) | Labor Charge | Inclusions |
|---|---|---|---|---|---|
| LG Inverter | Indoor Evaporator Cooling Coil | 1.5 Ton, Copper | Around ₹8,999 | Gas refilling + ₹499 | Multi-bend coil brazing, 400 PSI test, vacuum, gas refill |
| Samsung | Outdoor Condenser Coil | 1.5 Ton Copper | Around ₹7,899 | Gas refilling + ₹499 | Curved coil brazing, 400 PSI test, vacuum, gas refill |
| Godrej | Outdoor Condenser Coil | 1 Ton Copper | Around ₹4,499 | Gas refilling + ₹499 | Curved coil brazing, 400 PSI test, vacuum, gas refill |
| Hitachi | Outdoor Condenser Coil | 1 Ton Copper | Around ₹3,999 | Gas refilling + ₹499 | Curved coil brazing, 400 PSI test, vacuum, gas refill |
| Mitsubishi Heavy | Outdoor Condenser Coil | 2 Ton Copper | Around ₹10,999 | Gas refilling + ₹499 | Commercial condenser brazing, 400 PSI test, vacuum, gas refill |
| General / Generic | Copper Cooling Coils (Indoor) | 1.0–1.5 Ton Copper | ₹4,299 to ₹7,999 | Gas refilling + ₹499 | Multi-bend coil brazing, 400 PSI test, vacuum, gas refill |
| Blue Star | Outdoor Condenser Coil | 1 Ton, 5 Star Copper | ₹3,699 | Gas refilling + ₹499 | Curved coil brazing, 400 PSI test, vacuum, gas refill |
| Voltas | Outdoor Condenser Coil | 1.5 Ton, 3 to 5 Star Copper | ₹5,999 to ₹6,899 | Gas refilling + ₹499 | Curved coil brazing, 400 PSI test, vacuum, gas refill |
| Overall Split AC Coils Range in India | ₹3,999 to ₹10,999 | Gas Refilling + ₹499 (Labor) | |||
AC PCB (Printed Circuit Board) Repair & Replacement Cost Guide
AC PCB (Printed Circuit Board) repair and replacement costs in Delhi generally range from ₹1,599/- to ₹11,999/-, depending on whether it is a component-level fix or a full board replacement. All pricing includes complete labor charges for on-site diagnostic testing, PCB extraction, bench micro-soldering, re-installation, and dynamic cooling calibration.
Component-Level Repair vs. Full Board Replacement
Our micro-electronics technicians test and replace discrete burnt components: IGBT transistors, IPM power blocks, SMPS switching transformers, relays, bridge rectifiers, electrolytic filter capacitors, and MOV surge varistors without discarding the entire motherboard.
Necessary when multi-layer copper PCB tracks are carbonized by high-voltage lightning strikes, or when the proprietary MCU (Microcontroller Unit) internal firmware memory is irrevocably fried.
- • Dead Unit: AC has incoming wall power, but display does not turn on and buzzer does not beep
- • Error Codes: Indoor display flashes communication or IPM failure codes (e.g. CH05, E1, E6, F3, P0, P4)
- • Compressor Won't Start: Indoor blower blows room air, but outdoor unit never triggers or trips instantly
- • Burnt Smell / Blown Fuse: Tripping home MCB breaker immediately upon powering up
Cost Breakdown by AC Type (Including Labor Charge)
Transparent pricing for Window, Non-Inverter Split, and Inverter AC circuit boards in Delhi NCR.
Window AC PCB Circuit
Split AC Fixed-Speed PCB
Inverter AC PCB (High-Tech Module)
No Extra Labor or Visiting Charges Added
Every quoted price for AC PCB repair or replacement strictly includes all technician labor charges. This covers doorstep circuit inspection, safely discharging high-voltage 380V DC filter capacitors, board extraction, lab micro-soldering with ESD protection, re-installation, sensor calibration, and dynamic load testing.
| AC Type | PCB Circuit Description | Component-Level Repair | Full Board Replacement | Labor Charge | Warranty Assurance |
|---|---|---|---|---|---|
| Window AC | Single Relay & Logic Control Board | ₹1,599 – ₹2,499 | ₹3,499 – ₹4,499 | Included | 30–90 Days Workmanship Warranty |
| Split AC (Non-Inverter) | Indoor Microcontroller Motherboard | ₹1,999 – ₹4,999 | ₹4,999 – ₹7,499 | Included | 30–90 Days Workmanship Warranty |
| Inverter AC | Outdoor IPM Module & Dual Microprocessor | ₹4,499 – ₹7,999 | ₹8,000 – ₹11,999+ | Included | 30–90 Days Workmanship Warranty |
| Overall AC PCB Range in Delhi | ₹1,599/- to ₹11,999/- (All Costs Including Labor Charge) | ||||
Brands We Service
Expert repair, maintenance, and genuine spares support across all major manufacturers
Service & Parts Warranty Policy
Please confirm applicable repair and spare-part warranty terms before booking. Replacement parts carry genuine manufacturer warranty where provided.
Recently Serviced by AC Art Centre?
We believe in genuine service and honest relationships. We do not publish fabricated ratings or false review counts. If our technician serviced your home in Delhi, we would love to hear your honest feedback.
Related Services in AC Services
Other verified doorstep solutions provided by our team in Delhi
AC Inspection & Troubleshooting
Thorough diagnosis of cooling issues, compressor status, coil condition, and electrical wi...
AC Repair & Part Replacement
Fix cooling drop, noisy operation, PCB faults, fan motor failure, or continuous tripping.
AC Wet Servicing (Jet Pump Deep Clean)
High-pressure jet wash for indoor cooling coils, outdoor condenser, blower wheel, and drai...
AC Deep Foam Cleaning
Specialized anti-bacterial foam treatment for odor elimination, sanitization, and heavy du...